1" Flow Switch - $150.00 |
FS-1 - $150.00
|
- Part Number: FS-1
- Safety flow switches cut power to a chiller when water flow is interrupted or reduced due to a pump failure or obstruction in the water line.
- Running the chiller without adequate water flow will damage it.
- For Aquanetics Chillers: AFC-1, AFC-2, AFC-3
- For Aqua Logic Chillers: DS-1, DS-2, DS-3, DS-4
- 1" Inlet/Outlet
- for 115v chillers or heaters up to 10 Amps
- Free shipping for orders over $300
|
1-1/2" Flow Switch - 15amp - $140.00 |
FS-1.5-15 - $140.00
|
- Part Number: FS-1.5-15
- Safety flow switches cut power to a chiller when water flow is interrupted or reduced due to a pump failure or obstruction in the water line.
- Running the chiller without adequate water flow will damage it.
- For Aquanetics Chillers: AFC-4, AFC-5
- For Aqua Logic Chillers: DS-5
- 1-1/2" Inlet/Outlet
- for 115v chillers or heaters up to 15 Amps
- Free shipping for orders over $300
|
1-1/2" Flow Switch - 20amp - $140.00 |
FS-1.5-20 - $140.00
|
- Part Number: FS-1.5-20
- Safety flow switches cut power to a chiller when water flow is interrupted or reduced due to a pump failure or obstruction in the water line.
- Running the chiller without adequate water flow will damage it.
- For Aquanetics Chillers: AFC-6
- For Aqua Logic Chillers: DS-7
- 1-1/2" Inlet/Outlet
- for 115v chillers or heaters up to 20 Amps
- Free shipping for orders over $300
|
1-1/2" 230v Flow Switch - $145.00 |
FS-1.5-230 - $145.00
|
- Part Number: FS-1.5-230
- Safety flow switches cut power to a chiller when water flow is interrupted or reduced due to a pump failure or obstruction in the water line.
- Running the chiller without adequate water flow will damage it.
- For Aquanetics Chillers: AFC-6/230v, AFC-7, AFC-8, AFC-9
- For Aqua Logic Chillers: DS-6, DS-8, DS-9, DS-10
- 1-1/2" Inlet/Outlet
- for 230v chillers or heaters up to 20 Amps
- Free shipping for orders over $300
|
2" Flow Switch - $130.00 |
FS-2 - $130
|
- Part Number: FS-2
- Safety flow switches cut power to a chiller when water flow is interrupted or reduced due to a pump failure or obstruction in the water line.
- Running the chiller without adequate water flow will damage it.
- 2" Inlet/Outlet
- for 115v or 230v chillers or heaters up to 10 Amps
- No Power Cords - self install
- Free shipping for orders over $300
|
|
Presented By
